Calculating the volumes of quarries and stockpiles with a drone

Measuring how much material there is in a quarry, a cut or a stockpile by hand takes days and is never fully reliable. With a drone you get a terrain model and an accurate volume in a few hours, without stopping the work.

Updated 22 November 2026

How a volume is calculated

The drone surveys the area and a digital terrain model is derived from it. The volume is the difference between this model and a reference surface: the base plane of an excavation, the elevation from a previous survey or the bottom of a stockpile.

With two surveys at different times the difference tells how much material has been extracted or moved in the meantime.

Accuracy and control points

Accuracy depends on the procedure: reference points measured on the ground and suitable positioning equipment allow centimetre accuracy. In our quarry case study we measured 255,000 m³ of material over 15 hectares with centimetre accuracy.

What we deliver

  • Digital terrain model and up-to-date orthophoto.
  • Volumes by zone, calculated against the reference surface.
  • Sections and contour lines.
  • Comparison between successive surveys, to monitor progress.

Advantages over ground surveys

The drone covers a large area in a few hours, reaches dangerous or unstable spots without sending people in and produces a measurement that can be repeated over time. For quarries, dumps and building sites it means monitoring extraction and material movement with objective data.

Work examples

Frequently asked questions

How many hectares can be surveyed in a day?

Tens of hectares in a few hours, depending on accuracy and terrain. In the case study we surveyed 15 hectares.

Can a small stockpile be measured too?

Yes. The same method applies to stockpiles, cuts and site fills of any size.

More guides

Let’s talk

Tell us what you need to survey or film: we tell you which service fits, with no commitment.

Chat with us