Photogrammetry or LiDAR: which should you choose for your survey
These are the two most common techniques for surveying land with a drone and they give similar results, but they work differently and are not interchangeable. Here is how they differ and how to choose.
How photogrammetry works
The drone takes hundreds of overlapping photos of the area. Software compares them, recognises the same points in different images and reconstructs the shape of the ground and objects: the output is orthophotos, 3D models, point clouds and contour lines.
The result is rich in colour and visual detail, and the technique is the most economical for open areas. But it only sees what the camera sees: where vegetation covers the soil, the model describes the canopy and not the ground.
How LiDAR works
LiDAR emits laser pulses and measures their return time. Some pulses pass between the leaves and reach the ground, so ground elevations are obtained even beneath vegetation.
The product is a high-density point cloud from which terrain and surface models are derived. It costs more than photogrammetry, but in some jobs it is the only way to get reliable measurements.
The differences at a glance
- Vegetation: photogrammetry sees the canopy, LiDAR reaches the ground.
- Appearance: photogrammetry returns colour and texture, LiDAR a geometry-only point cloud.
- Cost: photogrammetry is generally cheaper.
- Typical use: photogrammetry for orthophotos, open areas and visual models; LiDAR for woods, slopes and very accurate elevations.
When to choose one or the other
If the area is open and you need orthophotos, plans or volumes, photogrammetry is usually the right choice. If there is vegetation, woods or dense scrub and you need the real ground elevations, you need LiDAR.
In some projects they are used together: LiDAR for the ground and photogrammetry for colour and visual detail. If in doubt, we recommend the right solution before the quote.
Work examples
- DTM and 3D SurveyA DTM with 1-metre contour interval and a 3D model of a coastal area in north-east Gallura
- Quarry Volume Calculation255,000 m³ of material measured across 15 hectares with centimetre accuracy
Frequently asked questions
Which is more accurate, photogrammetry or LiDAR?
It depends on the site and the procedure: on open areas photogrammetry reaches centimetre accuracy, while LiDAR is irreplaceable where vegetation hides the ground.
Can I use the data in CAD and GIS?
Yes. Orthophotos, point clouds, terrain models and contour lines are delivered in standard formats for the main software.
More guides
- What data you get from a drone survey and how to use it in CAD, GIS and BIMWhat data you receive from a drone survey: orthophoto, point cloud, DTM, contour lines and 3D models, and how to use them in CAD, GIS and BIM.
- How much does a drone survey costWhat a drone survey cost depends on: area, accuracy, technique, processing and travel. How a clear quote is built before you commit.
- Calculating the volumes of quarries and stockpiles with a droneHow volumes of quarries, cuts and stockpiles are calculated with a drone: method, accuracy, deliverables and advantages over ground surveys.


